Choosing a hair styling tool can feel confusing when you see a drawer full of curling irons, straighteners, wavers, and blow dry brushes. Each tool looks useful, but the right one depends on the finish you want and how your hair behaves.
The hair tool guide in the Pinterest image makes the choice simple. It focuses on four common results: smooth and straight hair, soft waves, defined curls, and quick volume.
This guide explains what each tool does, how to use it, what type of hair it works well with, and how to choose the right temperature. I will also point you toward the products that match the tools shown in the pin.
Start With the Finish You Want
The easiest way to choose a hair tool is to think about the hairstyle you want before thinking about the brand.
If you want smooth straight hair, a flat iron makes the most sense.
If you want loose movement and beachy texture, a hair waver can make the process much faster.
If you want individual curls, a curling iron or curling wand gives you more control.
If your main goal is volume and a fresh blowout look, a hot air brush can combine drying and styling in one step.
This is also why owning several tools does not always mean you need to use all of them. A tool should solve a specific styling problem.
Smooth and Straight Hair With a Flat Iron
A flat iron is one of the most useful hair tools because it can do more than straighten hair.
The pink straightener shown in the pin closely matches the design of the Mermade Hair Straightener. The Mermade model has rounded edges and floating ceramic plates, which also allow it to create bends, waves, and curls instead of only making the hair straight. The brand lists temperature control from 265°F to 450°F and recommends using a heat protectant before styling. (Mermade Hair US)
How to Use a Flat Iron
Start with completely dry hair. Divide the hair into small sections and gently brush each section before placing it between the plates.
Move the straightener slowly from the roots toward the ends. Try not to repeatedly pass over the same section.
For a softer finish, turn the straightener slightly as you move down the hair. This creates a gentle bend instead of a completely flat finish.
A flat iron can also create loose curls. Wrap a small section around the outside of the closed plates and slowly move the tool downward.
Amazon Product Shown in the Pin
The pink straightener appears to be a Mermade Hair straightener based on its shape and visible design.
Mermade Hair Straightener on Amazon
The exact Amazon listing can change, so check the product photos before ordering to make sure the color and model match the tool you want.
Soft Waves With a Three Barrel Waver
Soft waves are one of the easiest looks to create when you use a three barrel waver.
Instead of wrapping every piece of hair around a barrel, you place the hair between the heated barrels and press. The three barrel shape creates a repeated wave pattern through the hair.
The pink three barrel tool in the pin closely resembles the Mermade Hair Pro Waver. Mermade describes its waver as having three large barrels, several heat settings, automatic shutoff, a swivel cord, and universal voltage. (mermadehair.shop)
How to Create Soft Waves
Begin with dry, brushed hair.
Take a section that is small enough for the waver to heat evenly. Start close to the roots without touching the scalp.
Hold the waver in place for a few seconds, then release and move lower down the same section.
Continue until you reach the ends.
For softer waves, use larger sections and avoid holding the tool for too long. For stronger waves, use smaller sections and allow the tool more time to shape the hair.
The result can look especially pretty when you brush through the waves lightly after the hair has cooled.
Amazon Product Shown in the Pin
The pink triple barrel tool in the image appears similar to the Mermade Hair Pro Waver.
Mermade Hair Pro Waver on Amazon
There are also many other three barrel wavers on Amazon. Amazon currently lists several pink and rose colored wavers, including TYMO and other three barrel designs. (Amazon)
Defined Curls With a Curling Iron or Wand
When you want curls instead of repeated waves, use a curling iron or curling wand.
The size of the barrel makes a big difference. A smaller barrel creates tighter curls, while a larger barrel creates softer curls with more movement.
A curling iron has a clamp that holds the hair against the heated barrel. A curling wand does not usually have a clamp, so you wrap the hair around the barrel yourself.
How to Get Natural Looking Curls
Start by separating the hair into sections.
Take a small piece and wrap it around the barrel. Leave a little space at the end if you want a more relaxed finish.
Hold the hair for a few seconds and release it gently.
Let the curl cool before brushing or separating it. Hair holds its shape better when the curl has time to cool completely.
For natural looking curls, alternate the direction of the curls around your face. This prevents the finished style from looking like every curl was made in exactly the same direction.
Quick Volume With a Hot Air Brush
Sometimes the goal is not curls or straight hair. You simply want your hair to look fuller, smoother, and freshly blow dried.
That is where a hot air brush can be useful.
The pink and black brush shown in the pin closely resembles the REVLON One Step Volumizer style. The original REVLON One Step uses an oval brush shape with nylon pins and tufted bristles to smooth hair while adding volume. REVLON also lists multiple heat and speed settings on the product. (REVLON Hair Tools)
How to Use a Hot Air Brush
Do not begin with soaking wet hair.
Towel dry first and allow the hair to become partly dry. This reduces the amount of time the tool needs to stay on each section.
Divide the hair into sections.
Place the brush underneath a section near the roots and slowly pull it through the hair while turning the brush slightly.
For more root volume, lift the section upward while drying.
For curved ends, turn the brush inward or outward as you reach the ends.
The result is a smoother blowout with volume without needing to hold a separate brush and hair dryer at the same time.
Amazon Product Shown in the Pin
The brush shown in the pin appears closest to the REVLON One Step Volumizer style.
REVLON One Step Volumizer Pink on Amazon
REVLON notes that the original One Step Volumizer is designed for 120 volt US outlets, so anyone buying an imported version should check the voltage before using it. (REVLON Hair Tools)
Which Hair Tool Should You Use
| Hair goal | Tool to use | What it creates |
|---|---|---|
| Smooth and straight | Flat iron | Sleek straight hair |
| Soft waves | Three barrel waver | Repeated soft waves |
| Defined curls | Curling iron or wand | Individual curls |
| Quick volume | Hot air brush | Full smooth blowout |
| Loose bends | Flat iron | Soft movement |
| Beach texture | Hair waver | Bigger textured waves |
The important part is that there is no need to use every tool for every hairstyle. Choosing the tool based on the finish makes the styling routine much easier.
How to Choose the Right Heat Setting
Heat is one of the most important parts of using styling tools safely.
Fine or fragile hair generally needs less heat than thick or coarse hair. Start at a lower temperature and increase it only when you need more styling power.
Thick hair may need a higher temperature, but higher heat does not automatically mean better results.
The Mermade Hair Straightener, for example, allows temperatures from 265°F to 450°F, giving you room to adjust the setting instead of using one fixed temperature for every hair type. (Mermade Hair US)
A Simple Starting Guide
For fine hair, begin around 250°F to 320°F.
For medium hair, around 300°F to 380°F can be a useful starting range.
For thick or coarse hair, some people may need around 350°F to 410°F.
These are starting points rather than fixed rules. Your hair condition, texture, previous chemical treatments, and the particular tool all matter.
Always follow the instructions for your specific styling tool.
Why Heat Protectant Matters
A heat protectant should be part of a regular heat styling routine.
Apply it according to the directions on the product and make sure the hair is prepared properly before using a hot tool.
It is also important not to keep a hot tool sitting on the same section for too long. The goal is to shape the hair efficiently rather than repeatedly reheating the same area.
Mermade specifically recommends preparing the hair with heat protectant before using its straightener. (Mermade Hair US)
The Hair Tool Routine That Makes Sense
Imagine getting ready on a normal morning.
Your hair is clean and dry, but it needs some shape.
If you want a smooth everyday style, reach for the flat iron.
If you want your hair to look fuller, use the hot air brush.
If you are going somewhere and want visible waves, the three barrel waver makes the process simple.
If you want curls around your face or a more polished curled style, use the curling iron or wand.
The tool changes according to the result. That simple idea can save time and can also keep you from using a more complicated tool than you actually need.
How to Keep Your Hair Tools in Good Condition
Clean styling tools regularly.
Product buildup can collect on flat iron plates and curling barrels. Let the tool cool completely before cleaning it.
For hot air brushes, remove loose hair from the bristles and keep the air openings clear.
Never wrap the power cord tightly around a hot tool.
Allow every heated tool to cool completely before putting it away.
Mermade also advises allowing its heated appliances to cool before storage and placing heated appliances only on heat resistant surfaces. (Mermade Hair US)
The Simple Hair Tool Checklist
Before buying a new hair tool, ask yourself four simple questions.
Do I want straight hair?
Look for a flat iron with adjustable heat and smooth plates.
Do I want waves?
A three barrel waver is designed for repeated waves and can be quicker than curling individual sections.
Do I want curls?
Choose a curling iron or wand based on the curl size you want.
Do I want volume?
A hot air brush can help combine drying, smoothing, and volume in one styling step.
The tools shown in the pin cover these four basic styling needs, which is why this type of hair tool collection can be useful for someone who likes changing their hairstyle without making every morning complicated.
Products That Match the Pin
Pink flat iron: Mermade Hair Straightener
Shop the Mermade Pink Straightener on Amazon
Pink three barrel waver: Mermade Hair Pro Waver
Shop the Mermade Pink Pro Waver on Amazon
Pink hot air brush: REVLON One Step Volumizer
Shop the REVLON Pink One Step Volumizer on Amazon
Curling tools: Amazon has several pink ceramic curling irons and wands in different barrel sizes. (Amazon)
Browse Pink Curling Wands on Amazon
Final Thoughts
The best hair tool is usually the one that matches the result you are trying to create.
For smooth hair, think flat iron.
For soft waves, think three barrel waver.
For defined curls, think curling iron or wand.
For quick volume, think hot air brush.
Once you know what each tool is designed to do, choosing becomes much easier. You do not need a complicated routine. You just need the right tool for the finish you want, the right heat setting for your hair, and enough time to let the style cool and settle.